Difference between revisions of "Connecting Your SMART Document Camera"

From USD437
Jump to: navigation, search
Line 12: Line 12:
  
 
1. Connect one end of your VGA cable to your computer normally. Connect the other end of your VGA cable to the black VGA port on the back of the SMART Document Camera labeled "VGA In", pictured below.  
 
1. Connect one end of your VGA cable to your computer normally. Connect the other end of your VGA cable to the black VGA port on the back of the SMART Document Camera labeled "VGA In", pictured below.  
 +
 
''*Special Note - If you have a VGA cable with audio, as shown in the picture below, connect this cable between your laptop and your SMART Document Camera, and connect a VGA cable without an audio between the document camera and the wall jack.
 
''*Special Note - If you have a VGA cable with audio, as shown in the picture below, connect this cable between your laptop and your SMART Document Camera, and connect a VGA cable without an audio between the document camera and the wall jack.
  

Revision as of 00:18, 7 August 2017

How to Connect Your SMART Document Camera to Your Computer

This article will help you connect your SMART Document Camera to your laptop and projector.

*Here is a quick-reference flowchart for how everything is connected. Please continue the article below for a more detailed step-by-step guide.

Smartdocflowchart.png


1. Connect one end of your VGA cable to your computer normally. Connect the other end of your VGA cable to the black VGA port on the back of the SMART Document Camera labeled "VGA In", pictured below.

*Special Note - If you have a VGA cable with audio, as shown in the picture below, connect this cable between your laptop and your SMART Document Camera, and connect a VGA cable without an audio between the document camera and the wall jack.

P15gports.jpgVgawithaudio.jpg

Smartdoccam4.png


2. There will be an option to connect automatically. It will be left checked in this tutorial, but that's your personal preference. Click on the connect button.

Homewifi2.png


3. There will be a short pause while your computer negotiates with your wireless network. This should only take a few seconds.

Homewifi3.png


4. Type in the security key, or password for your wireless network. It's usually either set by the person who set up the home network, or printed on a sticker on your wireless router. Click "OK" in Windows 7, or "Next" in Windows 10.

Homewifi4.png


5. After another few seconds of authenticating to your network, you should see the wireless icon has changed to show you are connected.

Homewifi5.png


*Special Note - The district does not support or maintain home wireless profiles, passwords, or hardware.