Connecting Your SMART Document Camera - Revision history

Longian at 13:26, 7 August 2017

2017-08-07T13:26:05Z

2017-08-07T00:55:16Z

2017-08-07T00:53:45Z

2017-08-07T00:53:03Z

2017-08-07T00:52:29Z

2017-08-07T00:49:11Z

2017-08-07T00:36:19Z

2017-08-07T00:35:58Z

2017-08-07T00:27:31Z

2017-08-07T00:27:04Z

@@ Line 45: / Line 45: @@
 ----
-. At this point, your SMART Document Camera should be fully connected. In the image below, press the power button(highlighted with a black square) to turn the document camera on. If you plan on using your projector, your document camera will need to be on to show either your computer display or the output from the SMART Document Camera. Press the Document Camera button(highlighted with a red square) to project the document camera. Some models also come with a light for use with the Document Camera mode(highlighted in blue). Press the computer button (highlighted in green) to project your computer display in "Pass-Through" mode.
+. At this point, your SMART Document Camera should be fully connected. In the image below, press the power button(highlighted in black) to turn the document camera on. If you plan on using your projector, your document camera will need to be on to show either your computer display or the output from the SMART Document Camera. Press the Document Camera button(highlighted in red) to project the document camera. Some models also come with a light for use with the Document Camera mode(highlighted in blue). Press the computer button (highlighted in green) to project your computer display in "Pass-Through" mode.
 [[File:smartdoccam6.png|600px]]

← Older revision		Revision as of 00:55, 7 August 2017
Line 48:		Line 48:

	[[File:smartdoccam6.png\|600px]]		[[File:smartdoccam6.png\|600px]]
−	~~----~~
−
−	~~5. After another few seconds of authenticating to your network, you should see the wireless icon has changed to show you are connected.~~
−
−	~~[[File:homewifi5.png\|600px]]~~
−	~~----~~
−
−	~~''*Special Note - The district does not support or maintain home wireless profiles, passwords, or hardware.~~

@@ Line 33: / Line 33: @@
 . If you used a VGA cable with audio in step one, plug the 3.5mm audio end nearest where you plugged the VGA connector into your laptop's headphone jack. You'll need a 3.5mm audio extension cable to connect the other end to your wallplate.
-If you only have VGA cables with integrated audio, or if you do not have an extension cable, you will need a separate 3.5mm audio only cable to connect your laptop's headphone jack directly to the wallplate either cable is 6 feet long, so plan your layout accordingly.
+If you only have VGA cables without integrated audio, or if you do not have an extension cable, you will need a separate 3.5mm audio only cable to connect your laptop's headphone jack directly to the wallplate either cable is 6 feet long, so plan your layout accordingly.
 [[File:vgawithaudio.jpg|300px]] or [[File:35mm_jack.jpg|150px]]

@@ Line 13: / Line 13: @@
 . Connect one end of your VGA cable to your computer normally. Connect the other end of your VGA cable to the black VGA port on the back of the SMART Document Camera labeled "VGA In", pictured below.
-''*Special Note - If you have a VGA cable with audio, as shown in the picture below, connect this cable between your laptop and your SMART Document Camera, and connect a VGA cable without an audio between the document camera and the wall jack.
+''*Special Note - If you have a VGA cable with audio, as shown in the picture below, connect this cable between your laptop and your SMART Document Camera, and connect a VGA cable without an audio cable between the document camera and the wall jack.
 [[File:p15gports.jpg|300px]]

@@ Line 45: / Line 45: @@
 ----
-. At this point, your SMART Document Camera should be fully connected. In the image below, press the power button(highlighted with a black square) to turn the document camera on. If you plan on using your projector, your document camera will need to be on to show either your computer display or the output from the SMART Document Camera. Press the Document Camera button(highlighted with a red square) to project the document camera
+. At this point, your SMART Document Camera should be fully connected. In the image below, press the power button(highlighted with a black square) to turn the document camera on. If you plan on using your projector, your document camera will need to be on to show either your computer display or the output from the SMART Document Camera. Press the Document Camera button(highlighted with a red square) to project the document camera. Some models also come with a light for use with the Document Camera mode(highlighted in blue). Press the computer button (highlighted in green) to project your computer display in "Pass-Through" mode.
 [[File:smartdoccam6.png|600px]]

@@ Line 40: / Line 40: @@
 ----
-. Type in the security key, or password for your wireless network. It's usually either set by the person who set up the home network, or printed on a sticker on your wireless router. Click "OK" in Windows 7, or "Next" in Windows 10.
+. Connect the provided USB cable from the port on the back of the SMART Document Camera shown below to any available USB port on your computer, including a USB hub if you have one connected.
-[[File:homewifi4.png|600px]]
+[[File:smartdoccam7.png|300px]]
 ----

@@ Line 35: / Line 35: @@
 If you only have VGA cables with integrated audio, or if you do not have an extension cable, you will need a separate 3.5mm audio only cable to connect your laptop's headphone jack directly to the wallplate either cable is 6 feet long, so plan your layout accordingly.
-[[File:vgawithaudio.jpg|300px]] or [[File:35mm_jack.jpg|300px]]
+[[File:vgawithaudio.jpg|300px]] or [[File:35mm_jack.jpg|150px]]
 [[File:wallplate2.png|300px]]

@@ Line 31: / Line 31: @@
 ----
-. There will be a short pause while your computer negotiates with your wireless network. This should only take a few seconds.
+. If you used a VGA cable with audio in step one, plug the 3.5mm audio end nearest where you plugged the VGA connector into your laptop's headphone jack. You'll need a 3.5mm audio extension cable to connect the other end to your wallplate.
-[[File:homewifi3.png|600px]]
+If you only have VGA cables with integrated audio, or if you do not have an extension cable, you will need a separate 3.5mm audio only cable to connect your laptop's headphone jack directly to the wallplate either cable is 6 feet long, so plan your layout accordingly.
 ----

@@ Line 15: / Line 15: @@
 ''*Special Note - If you have a VGA cable with audio, as shown in the picture below, connect this cable between your laptop and your SMART Document Camera, and connect a VGA cable without an audio between the document camera and the wall jack.
-[[File:p15gports.jpg|300px]][[File:vgawithaudio.jpg|300px]]
+[[File:p15gports.jpg|300px]]
 [[File:smartdoccam4.png|600px]]

@@ Line 20: / Line 20: @@
 ----
-. There will be an option to connect automatically. It will be left checked in this tutorial, but that's your personal preference. Click on the connect button.
+. Connect a VGA cable from the port on the back of your SMART Document Camera labeled "VGA Out" to the VGA port on your wallplate by your desk.
-[[File:homewifi2.png|600px]]
+[[File:vgacabletip.jpg|300px]]
 ----