USD437 - User contributions [en]

Scanning with Papercut Drive

2026-05-11T21:02:29Z

Scottsta: /* Scanning to Google Drive */

= Scanning to Google Drive =

1. At the copier, select “ID Number” and enter your six digit employee number.

[[File:PaperCut-ScanGD-Login.jpg|300px]]
[[File:PaperCut-ScanGD-LoginPINv1.jpg|300px]]
[[File:PaperCut-ScanGD-LoginPINv2.jpg|300px]]

2. Select "Scan".

[[File:papercut4.png]]

3. Select "Scan to Google Drive".

[[File:PaperCut-ScanGD-StGD.jpg|300px]]

4. Place the paper/s you are wanting to scan. You can place them in the paper feeder on top of the copier face up with the 1st page on top. This option will be best if you have multple pages or 2 sided pages. You can also open the top of the copier and lay your page face down onto the glass if you are only scanning 1 side of 1 page. Make sure you close the lid before scanning.

[[File:PaperCut-Scan-PaperFeeder.jpg|300px]]
[[File:PaperCut-Scan-Glass.jpg|300px]]

5. Verify that it is your username listed at the top of the screen.

[[File:PaperCut-ScanGD-ScanInfo.jpg|300px]]

6. You can change the name of the file at this time if you'd like or you can change the name later after you have scanned it. You can also adjust the scan settings if you need to by clicking Settings.

7. Click "Start Scanning" to begin scanning.

8. At this point you are finished at the scanner. Collect your papers, Click "Logout" on the copier, and return to your computer.

9. Sign into your district Google email. You should have an email from "Scans for PaperCut MF". Open this message.

''' The first time you scan to Google Drive there will be some set up. Use these steps to complete the set up. '''

10. In this message you will be told you need to do a one time authorization of the "Scans for PaperCut MF" application. Click the "Login to Google Drive" button.

[[File:PaperCut-ScanGD-AuthEmail.jpg|300px]]

11. Select your Google Account.

[[File:PaperCut-ScanGD-AuthAccount.jpg|300px]]

12. Select "Allow".

[[File:PaperCut-ScanGD-AuthAllow.jpg|300px]]

13. You should now see a page indicating that you completed the authorization. Close out of this screen and return to your email.

[[File:PaperCut-ScanGD-AuthConfirm.jpg|300px]]

14. You are finished with the initial email you were sent and should now have a 2nd email from "Scans for PaperCut MF". Open this message. If you don't see a new email wait a few minutes to allow it to finish uploading. If you still don't see a new email you can check your Google Drive by going to https://drive.google.com/.

''' After you've completed the one-time authorization you won't need to do steps 10-14 again. '''

15. In this message you will see the name of the file you scanned. Click the "Go to your scan!" button. This will open your scan.

[[File:PaperCut-ScanGD-FileAccess.jpg|300px]]

Scanning with Papercut Drive

2026-05-11T21:00:40Z

Scottsta: /* Scanning to Google Drive */

= Scanning to Google Drive =

1. At the copier, select “ID Number” and enter your six digit employee number.

[[File:PaperCut-ScanGD-Login.jpg]]
[[File:PaperCut-ScanGD-LoginPINv1.jpg]]
[[File:PaperCut-ScanGD-LoginPINv2.jpg]]

2. Select "Scan".

[[File:papercut4.png]]

3. Select "Scan to Google Drive".

[[File:PaperCut-ScanGD-StGD.jpg]]

4. Place the paper/s you are wanting to scan. You can place them in the paper feeder on top of the copier face up with the 1st page on top. This option will be best if you have multple pages or 2 sided pages. You can also open the top of the copier and lay your page face down onto the glass if you are only scanning 1 side of 1 page. Make sure you close the lid before scanning.

[[File:PaperCut-Scan-PaperFeeder.jpg]]
[[File:PaperCut-Scan-Glass.jpg]]

5. Verify that it is your username listed at the top of the screen.

[[File:PaperCut-ScanGD-ScanInfo.jpg]]

6. You can change the name of the file at this time if you'd like or you can change the name later after you have scanned it. You can also adjust the scan settings if you need to by clicking Settings.

7. Click "Start Scanning" to begin scanning.

8. At this point you are finished at the scanner. Collect your papers, Click "Logout" on the copier, and return to your computer.

9. Sign into your district Google email. You should have an email from "Scans for PaperCut MF". Open this message.

''' The first time you scan to Google Drive there will be some set up. Use these steps to complete the set up. '''

10. In this message you will be told you need to do a one time authorization of the "Scans for PaperCut MF" application. Click the "Login to Google Drive" button.

[[File:PaperCut-ScanGD-AuthEmail.jpg]]

11. Select your Google Account.

[[File:PaperCut-ScanGD-AuthAccount.jpg]]

12. Select "Allow".

[[File:PaperCut-ScanGD-AuthAllow.jpg]]

13. You should now see a page indicating that you completed the authorization. Close out of this screen and return to your email.

[[File:PaperCut-ScanGD-AuthConfirm.jpg]]

14. You are finished with the initial email you were sent and should now have a 2nd email from "Scans for PaperCut MF". Open this message. If you don't see a new email wait a few minutes to allow it to finish uploading. If you still don't see a new email you can check your Google Drive by going to https://drive.google.com/.

''' After you've completed the one-time authorization you won't need to do steps 10-14 again. '''

15. In this message you will see the name of the file you scanned. Click the "Go to your scan!" button. This will open your scan.

[[File:PaperCut-ScanGD-FileAccess.jpg]]

File:PaperCut-ScanGD-FileAccess.jpg

2026-05-11T20:49:20Z

Scottsta:

File:PaperCut-ScanGD-AuthConfirm.jpg

2026-05-11T20:45:30Z

Scottsta:

File:PaperCut-ScanGD-AuthAllow.jpg

2026-05-11T20:44:29Z

Scottsta:

File:PaperCut-ScanGD-AuthAccount.jpg

2026-05-11T20:43:37Z

Scottsta:

File:PaperCut-ScanGD-AuthEmail.jpg

2026-05-11T20:43:03Z

Scottsta:

File:PaperCut-ScanGD-ScanInfo.jpg

2026-05-11T20:42:20Z

Scottsta:

File:PaperCut-Scan-Glass.jpg

2026-05-11T20:41:23Z

Scottsta:

File:PaperCut-Scan-PaperFeeder.jpg

2026-05-11T20:40:14Z

Scottsta:

File:PaperCut-ScanGD-StGD.jpg

2026-05-11T20:39:27Z

Scottsta:

File:PaperCut-ScanGD-LoginPINv2.jpg

2026-05-11T20:38:33Z

Scottsta:

File:PaperCut-ScanGD-LoginPINv1.jpg

2026-05-11T20:38:06Z

Scottsta:

File:PaperCut-ScanGD-Login.jpg

2026-05-11T20:33:41Z

Scottsta:

Topic Printing

2026-05-11T18:34:29Z

Scottsta: /* Printing */

== Printing ==

*[[Printing_with_Papercut|Printing with Papercut]]
*[[Scanning_with_Papercut_Drive|Scanning with Papercut to Google Drive]]

Topic Printing

2026-05-11T18:34:10Z

Scottsta: /* Printing */

== Printing ==

*[[Printing_with_Papercut|Printing with Papercut]]
*[[Scanning_with_Papercut_GoogleDrive|Scanning with Papercut to Google Drive]]

Scanning with Papercut Drive

2026-05-11T18:33:22Z

Scottsta:

= Scanning to Google Drive =

1. At the copier, select “ID Number” and enter your six digit employee number.

2. Select "Scan".

[[File:papercut4.png]]

3. Select "Scan to Google Drive".

4. Place the paper/s you are wanting to scan. You can place them in the paper feeder on top of the copier face up with the 1st page on top. This option will be best if you have multple pages or 2 sided pages. You can also open the top of the copier and lay your page face down onto the glass if you are only scanning 1 side of 1 page. Make sure you close the lid before scanning.

5. Verify that it is your username listed at the top of the screen.

6. You can change the name of the file at this time if you'd like or you can change the name later after you have scanned it. You can also adjust the scan settings if you need to by clicking Settings.

7. Click "Start Scanning" to begin scanning.

8. At this point you are finished at the scanner. Collect your papers, Click "Logout" on the copier, and return to your computer.

9. Sign into your district Google email. You should have an email from "Scans for PaperCut MF". Open this message.

''' The first time you scan to Google Drive there will be some set up. Use these steps to complete the set up. '''

10. In this message you will be told you need to do a one time authorization of the "Scans for PaperCut MF" application. Click the "Login to Google Drive" button.

11. Select your Google Account.

12. Select "Allow".

13. You should now see a page indicating that you completed the authorization. Close out of this screen and return to your email.

14. You are finished with the initial email you were sent and should now have a 2nd email from "Scans for PaperCut MF". Open this message. If you don't see a new email wait a few minutes to allow it to finish uploading. If you still don't see a new email you can check your Google Drive by going to https://drive.google.com/.

''' After you've completed the one-time authorization you won't need to do steps 10-14 again. '''

15. In this message you will see the name of the file you scanned. Click the "Go to your scan!" button. This will open your scan.

Scanning with Papercut Drive

2026-05-11T18:33:02Z

Scottsta: /* Scanning to Google Drive */

= Scanning to Google Drive =

1. At the copier, select “ID Number” and enter your six digit employee number.

[[File:papercut1.png]]

2. Select "Scan".

[[File:papercut4.png]]

3. Select "Scan to Google Drive".

4. Place the paper/s you are wanting to scan. You can place them in the paper feeder on top of the copier face up with the 1st page on top. This option will be best if you have multple pages or 2 sided pages. You can also open the top of the copier and lay your page face down onto the glass if you are only scanning 1 side of 1 page. Make sure you close the lid before scanning.

5. Verify that it is your username listed at the top of the screen.

6. You can change the name of the file at this time if you'd like or you can change the name later after you have scanned it. You can also adjust the scan settings if you need to by clicking Settings.

7. Click "Start Scanning" to begin scanning.

8. At this point you are finished at the scanner. Collect your papers, Click "Logout" on the copier, and return to your computer.

9. Sign into your district Google email. You should have an email from "Scans for PaperCut MF". Open this message.

''' The first time you scan to Google Drive there will be some set up. Use these steps to complete the set up. '''

10. In this message you will be told you need to do a one time authorization of the "Scans for PaperCut MF" application. Click the "Login to Google Drive" button.

11. Select your Google Account.

12. Select "Allow".

13. You should now see a page indicating that you completed the authorization. Close out of this screen and return to your email.

14. You are finished with the initial email you were sent and should now have a 2nd email from "Scans for PaperCut MF". Open this message. If you don't see a new email wait a few minutes to allow it to finish uploading. If you still don't see a new email you can check your Google Drive by going to https://drive.google.com/.

''' After you've completed the one-time authorization you won't need to do steps 10-14 again. '''

15. In this message you will see the name of the file you scanned. Click the "Go to your scan!" button. This will open your scan.

Scanning with Papercut Drive

2026-05-11T17:24:37Z

Scottsta: Created page with "= Scanning to Google Drive = 1. At the copier, select “ID Number” and enter your six digit employee number. File:papercut1.png 2. Select "Scan". 3. Select "Scan to..."

= Scanning to Google Drive =

1. At the copier, select “ID Number” and enter your six digit employee number.

[[File:papercut1.png]]

2. Select "Scan".

3. Select "Scan to Google Drive".

4. Place the paper/s you are wanting to scan. You can place them in the paper feeder on top of the copier face up with the 1st page on top. This option will be best if you have multple pages or 2 sided pages. You can also open the top of the copier and lay your page face down onto the glass if you are only scanning 1 side of 1 page. Make sure you close the lid before scanning.

5. Verify that it is your username listed at the top of the screen.

6. You can change the name of the file at this time if you'd like or you can change the name later after you have scanned it. You can also adjust the scan settings if you need to by clicking Settings.

7. Click "Start Scanning" to begin scanning.

8. At this point you are finished at the scanner. Collect your papers, Click "Logout" on the copier, and return to your computer.

9. Sign into your district Google email. You should have an email from "Scans for PaperCut MF". Open this message.

''' The first time you scan to Google Drive there will be some set up. Use these steps to complete the set up. '''

10. In this message you will be told you need to do a one time authorization of the "Scans for PaperCut MF" application. Click the "Login to Google Drive" button.

11. Select your Google Account.

12. Select "Allow".

13. You should now see a page indicating that you completed the authorization. Close out of this screen and return to your email.

14. You are finished with the initial email you were sent and should now have a 2nd email from "Scans for PaperCut MF". Open this message. If you don't see a new email wait a few minutes to allow it to finish uploading. If you still don't see a new email you can check your Google Drive by going to https://drive.google.com/.

''' After you've completed the one-time authorization you won't need to do steps 10-14 again. '''

15. In this message you will see the name of the file you scanned. Click the "Go to your scan!" button. This will open your scan.

Topic Printing

2026-05-11T16:51:10Z

Scottsta: /* Printing */

== Printing ==

*[[Printing_with_Papercut|Printing with Papercut]]
*[[Scanning_with_Papercut_Drive|Scanning with Papercut to Google Drive]]

File:ICWorkflowAttendOffice.jpg

2025-08-04T16:37:56Z

Scottsta:

Campus Workflow - Hallpass/Classroom Check-in

2025-08-04T16:37:21Z

Scottsta:

The Campus Workflow allows your students to get a digital hallpass and to check-in to their classes.

Please make sure you turn off your chromebook at least once a week.

==Preparing Your Chromebook==

Sign into your Infinite Campus account on the kiosk chromebook provided to your classroom.

Once signed in go to your Main Menu and select Attendance Office
[[File:ICWorkflowAttendOffice.jpg]]

Under the Scanning heading you'll find Classroom Attendance Kiosk. Click this option.
[[File:ICWorkflowScanningMenu.jpg]]

Here you will want to select your room number from the Room drop-down.
[[File:ICWorkflowRoomSelect.jpg]]

There are 3 checkboxes that are already checked for you. You can uncheck the boxes a necessary.
Issue Hall Pass - This option allows students in your class to get a digital hall pass from this kiosk.
Take Attendance - This option allows students to check into class when they arrive. It will automatically mark them as present, absent, or tardy depending on what time they scanned in or if they don't scan in.
Allow Hall Pass for Non-Rostered Students - This option allows students to get a digital hall pass if they are not rostered into your classroom. This is useful if a student comes from another class to yours and needs to go back.
[[File:ICWorkflowKioskSetup.jpg]]

Once you are ready click the blue Launch button at the bottom of the screen.
[[File:ICWorkflowLaunch.jpg]]

This will sign you out of Campus so students are not able to access other tools and a new window will open. Students will now be able to scan in and get hallpasses.
[[File:ICWorkflowWindow.jpg]]

File:ICWorkflowWindow.jpg

2025-08-04T16:33:12Z

Scottsta:

File:ICWorkflowLaunch.jpg

2025-08-04T16:32:51Z

Scottsta:

File:ICWorkflowRoomSelect.jpg

2025-08-04T16:32:29Z

Scottsta:

File:ICWorkflowKioskSetup.jpg

2025-08-04T16:32:10Z

Scottsta:

File:ICWorkflowScanningMenu.jpg

2025-08-04T16:31:40Z

Scottsta:

Campus Workflow - Hallpass/Classroom Check-in

2025-08-04T16:29:49Z

Scottsta: Created page with "The Campus Workflow allows your students to get a digital hallpass and to check-in to their classes. Please make sure you turn off your chromebook at least once a week. ==Pr..."

The Campus Workflow allows your students to get a digital hallpass and to check-in to their classes.

Please make sure you turn off your chromebook at least once a week.

==Preparing Your Chromebook==

[[File:InstructionNewLookToggle.png]]
[[File:ToolsNewLookToggle.png]]

Sign into your Infinite Campus account on the kiosk chromebook provided to your classroom.

Once signed in go to your Main Menu and select Attendance Office

Under the Scanning heading you'll find Classroom Attendance Kiosk. Click this option.

Here you will want to select your room number from the Room drop-down.

There are 3 checkboxes that are already checked for you. You can uncheck the boxes a necessary.
Issue Hall Pass - This option allows students in your class to get a digital hall pass from this kiosk.
Take Attendance - This option allows students to check into class when they arrive. It will automatically mark them as present, absent, or tardy depending on what time they scanned in or if they don't scan in.
Allow Hall Pass for Non-Rostered Students - This option allows students to get a digital hall pass if they are not rostered into your classroom. This is useful if a student comes from another class to yours and needs to go back.

Once you are ready click the blue Launch button at the bottom of the screen. This will sign you out of Campus so students are not able to access other tools and a new window will open. Students will now be able to scan in and get hallpasses.

Topic Infinite Campus

2025-08-04T16:18:54Z

Scottsta: /* Infinite Campus */

== Infinite Campus ==
<strong>Here are a few How-To's about using Infinite Campus!</strong>
<br>
*[[How-To Setup Your Gradebook|Setting Up Your Gradebook]]
*[[How-To Post Your Grades_HSMS| Posting Your Grades(HS/MS)]]
*[[How-To Post Your Grades_ELEM|Posting Your Grades(Elementary)]]
*[[How-To Use Teacher Messenger|Using Teacher Messenger]]
*[[How-To Take Attendance|Taking Attendance]]
*[[How-To Submit Behavior Referrals]]
*[[How-To Setup Seating Charts|Setting Up Seating Charts]]
*[[Staff Online Payments|Adding Money to Your Lunch Account]]
*[[Adding a website for students to access]]
*[[How-To Setup Two-Factor Authentication]]
*[[How-To Create Your Campus Community Account]]
*[[New Look Coming to Campus]]
*[[Campus Workflow - Hallpass/Classroom Check-in]]

New Look Coming to Campus

2023-02-08T23:03:51Z

Scottsta:

There is a new look available in Infinite Campus. The old look is still available to use, but beginning Summer 2023 the old look will go away and you will have to use the new look. It is recommended that you use this year to get used to the new look.

For information directly from Infinite Campus visit the Campus Community page: https://kb.infinitecampus.com/help/try-the-new-look-of-campus.

To turn on the new look Click on the person icon in the top right corner and toggle it on.

[[File:InstructionNewLookToggle.png]]
[[File:ToolsNewLookToggle.png]]

Your screen will automatically refresh and put you into the new view. You will still have access to all the same tools you had before, but where you find them may have changed. You'll want to spend this year getting used to the new locations of the tools.

Here are some items that will be helpful...

==Campus Instruction==
For the teachers, when you turn on the new look, you no longer need to switch to Campus Instruction. Under the Main Menu (folder icon in top left) you will find Instruction. All of your tools that were in Campus Instruction will now be located here.

[[File:NewLookInstruction.png]]

==Breadcrumbs==
The new look introduces Breadcrumbs in the top right corner. You can click on these to view tools available at each level. For example, if I'm on Student Information > General > Summary, I can click on General to see all the tools in Student Information > General or I can click on Student information to see all the tools in Student Information.

[[File:NewLookBreadcrumbs.png]]

==Tab Location==
In the classic look the tabs were across the top of the screen. You will now find the tabs along the right side of the screen. The tabs are in alphabetical order. You will find some of the tab names have changed.

[[File:NewLookTabLocation.png]]

==Tool Search==
You can now search for tools. Go to the Search screen (magnifying glass icon in top left) and change the search drop-down to Tool. Search for a tool that you are looking for and it should show up in the results.

[[File:NewlookToolSearch.png]]

==Submitting Suggestions/Complaints==
You can submit suggestions and/or complaints to Infinite Campus to help them better Infinite Campus. To do this just look for the Feedback button. [[File:FeedbackButton.jpg]]

A small window will open either on the right side of the screen or as it's own window where you can enter your feedback for the screen you are on. At the top of the feedback window it will tell you what screen you are sending feedback for. Once you submit this information is sent to the Infinite Campus team assigned to working on that screen/tool. Please don't just send messages saying something is bad. If you don't like something provide a reason why it is bad so they know what isn't working and can work on it.

[[File:FeedbackWindow2.jpg]] [[File:FeedbackWindow1.jpg]]

==Favorites==
You can now flag the tools you use the most as a favorite. This will add the tools to your Favorites list so you no longer have to go through the Main Menu to find them.

To flag a tool as a Favorite just pull up the tool then click the star next to its name. You can also remove a tool from your Favorites by clicking the star again.

[[File:IC-NewLook-Select.jpg]]

Once you’ve flagged a tool as a Favorite you’ll find it in the Favorites list which is the menu tab with the star icon.

[[File:IC-NewLook-List.jpg]]

You can also change the order of your Favorites by clicking the Edit button then clicking and dragging the tools in the order you want them to be in. Click Save when you’re finished.

[[File:IC-NewLook-Change.jpg]]

==Main Menu View - List vs Flyout==
There are two options for the Main Menu. You can use the List view or the Flyout view.

===Flyout===
The Flyout view is available when your browser is 1360 or more pixels wide. It is the default view when it's available.

This view will display the main category name. When clicked on a white box will appear next to the Main Menu with the additional menu items for that category.

[[File:IC_NewLook_MMView_Flyout_01.jpg]]

[[File:IC_NewLook_MMView_Flyout_02.jpg]]

===List===
The List view is available no matter the size of your browser, however it is the only option if your browser is less than 1360 pixels wide.

This view will display the main category name. When clicked on the additional menu items will appear underneath the category name.

[[File:IC_NewLook_MMView_List_01.jpg]] [[File:IC_NewLook_MMView_List_02.jpg]]

===Toggle===
If your browser is 1360 or more pixels wide you will be able to toggle between the two views. To do this locate the icon next to the Main Menu heading. Click on the icon to switch between the two views.

If you are currently on Flyout view the icon will look more like a bulleted list [[File:IC_NewLook_MMView_Icon_01.jpg]].

When you are on the List view the icon will look like four squares making a larger square [[File:IC_NewLook_MMView_Icon_02.jpg]]
.

New Look Coming to Campus

2023-02-08T23:02:38Z

Scottsta: /* Main Menu View - List vs Flyout */

There is a new look available in Infinite Campus. The old look is still available to use, but beginning Summer 2023 the old look will go away and you will have to use the new look. It is recommended that you use this year to get used to the new look.

For information directly from Infinite Campus visit the Campus Community page: https://kb.infinitecampus.com/help/try-the-new-look-of-campus.

To turn on the new look Click on the person icon in the top right corner and toggle it on.

[[File:InstructionNewLookToggle.png]]
[[File:ToolsNewLookToggle.png]]

Your screen will automatically refresh and put you into the new view. You will still have access to all the same tools you had before, but where you find them may have changed. You'll want to spend this year getting used to the new locations of the tools.

Here are some items that will be helpful...

==Campus Instruction==
For the teachers, when you turn on the new look, you no longer need to switch to Campus Instruction. Under the Main Menu (folder icon in top left) you will find Instruction. All of your tools that were in Campus Instruction will now be located here.

[[File:NewLookInstruction.png]]

==Breadcrumbs==
The new look introduces Breadcrumbs in the top right corner. You can click on these to view tools available at each level. For example, if I'm on Student Information > General > Summary, I can click on General to see all the tools in Student Information > General or I can click on Student information to see all the tools in Student Information.

[[File:NewLookBreadcrumbs.png]]

==Tab Location==
In the classic look the tabs were across the top of the screen. You will now find the tabs along the right side of the screen. The tabs are in alphabetical order. You will find some of the tab names have changed.

[[File:NewLookTabLocation.png]]

==Tool Search==
You can now search for tools. Go to the Search screen (magnifying glass icon in top left) and change the search drop-down to Tool. Search for a tool that you are looking for and it should show up in the results.

[[File:NewlookToolSearch.png]]

==Submitting Suggestions/Complaints==
You can submit suggestions and/or complaints to Infinite Campus to help them better Infinite Campus. To do this just look for the Feedback button. [[File:FeedbackButton.jpg]]

A small window will open either on the right side of the screen or as it's own window where you can enter your feedback for the screen you are on. At the top of the feedback window it will tell you what screen you are sending feedback for. Once you submit this information is sent to the Infinite Campus team assigned to working on that screen/tool. Please don't just send messages saying something is bad. If you don't like something provide a reason why it is bad so they know what isn't working and can work on it.

[[File:FeedbackWindow2.jpg]] [[File:FeedbackWindow1.jpg]]

==Favorites==
You can now flag the tools you use the most as a favorite. This will add the tools to your Favorites list so you no longer have to go through the Main Menu to find them.

To flag a tool as a Favorite just pull up the tool then click the star next to its name. You can also remove a tool from your Favorites by clicking the star again.

[[File:IC-NewLook-Select.jpg]]

Once you’ve flagged a tool as a Favorite you’ll find it in the Favorites list which is the menu tab with the star icon.

[[File:IC-NewLook-List.jpg]]

You can also change the order of your Favorites by clicking the Edit button then clicking and dragging the tools in the order you want them to be in. Click Save when you’re finished.

[[File:IC-NewLook-Change.jpg]]

==Main Menu View - List vs Flyout==
There are two options for the Main Menu. You can use the List view or the Flyout view.

The Flyout view is available when your browser is 1360 or more pixels wide. It is the default view when it's available.

This view will display the main category name. When clicked on a white box will appear next to the Main Menu with the additional menu items for that category.

[[File:IC_NewLook_MMView_Flyout_01.jpg]]

[[File:IC_NewLook_MMView_Flyout_02.jpg]]

The List view is available no matter the size of your browser, however it is the only option if your browser is less than 1360 pixels wide.

This view will display the main category name. When clicked on the additional menu items will appear underneath the category name.

[[File:IC_NewLook_MMView_List_01.jpg]] [[File:IC_NewLook_MMView_List_02.jpg]]

If your browser is 1360 or more pixels wide you will be able to toggle between the two views. To do this locate the icon next to the Main Menu heading. Click on the icon to switch between the two views.

If you are currently on Flyout view the icon will look more like a bulleted list [[File:IC_NewLook_MMView_Icon_01.jpg]].

When you are on the List view the icon will look like four squares making a larger square [[File:IC_NewLook_MMView_Icon_02.jpg]]
.

New Look Coming to Campus

2023-02-08T23:01:47Z

Scottsta:

There is a new look available in Infinite Campus. The old look is still available to use, but beginning Summer 2023 the old look will go away and you will have to use the new look. It is recommended that you use this year to get used to the new look.

For information directly from Infinite Campus visit the Campus Community page: https://kb.infinitecampus.com/help/try-the-new-look-of-campus.

To turn on the new look Click on the person icon in the top right corner and toggle it on.

[[File:InstructionNewLookToggle.png]]
[[File:ToolsNewLookToggle.png]]

Your screen will automatically refresh and put you into the new view. You will still have access to all the same tools you had before, but where you find them may have changed. You'll want to spend this year getting used to the new locations of the tools.

Here are some items that will be helpful...

==Campus Instruction==
For the teachers, when you turn on the new look, you no longer need to switch to Campus Instruction. Under the Main Menu (folder icon in top left) you will find Instruction. All of your tools that were in Campus Instruction will now be located here.

[[File:NewLookInstruction.png]]

==Breadcrumbs==
The new look introduces Breadcrumbs in the top right corner. You can click on these to view tools available at each level. For example, if I'm on Student Information > General > Summary, I can click on General to see all the tools in Student Information > General or I can click on Student information to see all the tools in Student Information.

[[File:NewLookBreadcrumbs.png]]

==Tab Location==
In the classic look the tabs were across the top of the screen. You will now find the tabs along the right side of the screen. The tabs are in alphabetical order. You will find some of the tab names have changed.

[[File:NewLookTabLocation.png]]

==Tool Search==
You can now search for tools. Go to the Search screen (magnifying glass icon in top left) and change the search drop-down to Tool. Search for a tool that you are looking for and it should show up in the results.

[[File:NewlookToolSearch.png]]

==Submitting Suggestions/Complaints==
You can submit suggestions and/or complaints to Infinite Campus to help them better Infinite Campus. To do this just look for the Feedback button. [[File:FeedbackButton.jpg]]

A small window will open either on the right side of the screen or as it's own window where you can enter your feedback for the screen you are on. At the top of the feedback window it will tell you what screen you are sending feedback for. Once you submit this information is sent to the Infinite Campus team assigned to working on that screen/tool. Please don't just send messages saying something is bad. If you don't like something provide a reason why it is bad so they know what isn't working and can work on it.

[[File:FeedbackWindow2.jpg]] [[File:FeedbackWindow1.jpg]]

==Favorites==
You can now flag the tools you use the most as a favorite. This will add the tools to your Favorites list so you no longer have to go through the Main Menu to find them.

To flag a tool as a Favorite just pull up the tool then click the star next to its name. You can also remove a tool from your Favorites by clicking the star again.

[[File:IC-NewLook-Select.jpg]]

Once you’ve flagged a tool as a Favorite you’ll find it in the Favorites list which is the menu tab with the star icon.

[[File:IC-NewLook-List.jpg]]

You can also change the order of your Favorites by clicking the Edit button then clicking and dragging the tools in the order you want them to be in. Click Save when you’re finished.

[[File:IC-NewLook-Change.jpg]]

==Main Menu View - List vs Flyout==
There are two options for the Main Menu. You can use the List view or the Flyout view.

The Flyout view is available when your browser is 1360 or more pixels wide. It is the default view when it's available.

This view will display the main category name. When clicked on a white box will appear next to the Main Menu with the additional menu items for that category.

[[File:IC_NewLook_MMView_Flyout_01.jpg]]

[[File:IC_NewLook_MMView_Flyout_02.jpg]]

The List view is available no matter the size of your browser, however it is the only option if your browser is less than 1360 pixels wide.

This view will display the main category name. When clicked on the additional menu items will appear underneath the category name.

[[File:IC_NewLook_MMView_List_01.jpg]] [[File:IC_NewLook_MMView_List_02.jpg]]

If your browser is 1360 or more pixels wide you will be able to toggle between the two views. To do this locate the icon next to the Main Menu heading. Click on the icon to switch between the two views.

If you are currently on Flyout view the icon will look more like a bulleted list [[File:IC_NewLook_MMView_Icon_01.jpg]].

When you are on the List view the icon will look like four squares making a larger square [[File:IC_NewLook_MMView_Icon_02.jpg]]
.

File:IC NewLook MMView List 02.jpg

2023-02-08T22:56:56Z

Scottsta:

File:IC NewLook MMView List 01.jpg

2023-02-08T22:56:42Z

Scottsta:

File:IC NewLook MMView Icon 02.jpg

2023-02-08T22:56:16Z

Scottsta:

File:IC NewLook MMView Icon 01.jpg

2023-02-08T22:56:00Z

Scottsta:

File:IC NewLook MMView Flyout 02.jpg

2023-02-08T22:55:37Z

Scottsta:

File:IC NewLook MMView Flyout 01.jpg

2023-02-08T22:55:16Z

Scottsta:

New Look Coming to Campus

2023-02-08T22:54:22Z

Scottsta:

There is a new look available in Infinite Campus. The old look is still available to use, but beginning Summer 2023 the old look will go away and you will have to use the new look. It is recommended that you use this year to get used to the new look.

For information directly from Infinite Campus visit the Campus Community page: https://kb.infinitecampus.com/help/try-the-new-look-of-campus.

To turn on the new look Click on the person icon in the top right corner and toggle it on.

[[File:InstructionNewLookToggle.png]]
[[File:ToolsNewLookToggle.png]]

Your screen will automatically refresh and put you into the new view. You will still have access to all the same tools you had before, but where you find them may have changed. You'll want to spend this year getting used to the new locations of the tools.

Here are some items that will be helpful...

==Campus Instruction==
For the teachers, when you turn on the new look, you no longer need to switch to Campus Instruction. Under the Main Menu (folder icon in top left) you will find Instruction. All of your tools that were in Campus Instruction will now be located here.

[[File:NewLookInstruction.png]]

==Breadcrumbs==
The new look introduces Breadcrumbs in the top right corner. You can click on these to view tools available at each level. For example, if I'm on Student Information > General > Summary, I can click on General to see all the tools in Student Information > General or I can click on Student information to see all the tools in Student Information.

[[File:NewLookBreadcrumbs.png]]

==Tab Location==
In the classic look the tabs were across the top of the screen. You will now find the tabs along the right side of the screen. The tabs are in alphabetical order. You will find some of the tab names have changed.

[[File:NewLookTabLocation.png]]

==Tool Search==
You can now search for tools. Go to the Search screen (magnifying glass icon in top left) and change the search drop-down to Tool. Search for a tool that you are looking for and it should show up in the results.

[[File:NewlookToolSearch.png]]

==Submitting Suggestions/Complaints==
You can submit suggestions and/or complaints to Infinite Campus to help them better Infinite Campus. To do this just look for the Feedback button. [[File:FeedbackButton.jpg]]

A small window will open either on the right side of the screen or as it's own window where you can enter your feedback for the screen you are on. At the top of the feedback window it will tell you what screen you are sending feedback for. Once you submit this information is sent to the Infinite Campus team assigned to working on that screen/tool. Please don't just send messages saying something is bad. If you don't like something provide a reason why it is bad so they know what isn't working and can work on it.

[[File:FeedbackWindow2.jpg]] [[File:FeedbackWindow1.jpg]]

==Favorites==
You can now flag the tools you use the most as a favorite. This will add the tools to your Favorites list so you no longer have to go through the Main Menu to find them.

To flag a tool as a Favorite just pull up the tool then click the star next to its name. You can also remove a tool from your Favorites by clicking the star again.

[[File:IC-NewLook-Select.jpg]]

Once you’ve flagged a tool as a Favorite you’ll find it in the Favorites list which is the menu tab with the star icon.

[[File:IC-NewLook-List.jpg]]

You can also change the order of your Favorites by clicking the Edit button then clicking and dragging the tools in the order you want them to be in. Click Save when you’re finished.

[[File:IC-NewLook-Change.jpg]]

==Main Menu View - List vs Flyout==
There are two options for the Main Menu. You can use the List view or the Flyout view.

The Flyout view is available when your browser is 1360 or more pixels wide. It is the default view when it's available.

This view will display the main category name. When clicked on a white box will appear next to the Main Menu with the additional menu items for that category.

The List view is available no matter the size of your browser, however it is the only option if your browser is less than 1360 pixels wide.

This view will display the main category name. When clicked on the additional menu items will appear underneath the category name.

If your browser is 1360 or more pixels wide you will be able to toggle between the two views. To do this locate the icon next to the Main Menu heading. Click on the icon to switch between the two views. If you are currently on Flyout view the icon will look more like a bulleted list. When you are on the List view the icon will look like four squares making a larger square.

New Look Coming to Campus

2023-02-08T19:24:21Z

Scottsta:

New Look Coming to Campus

2023-02-07T22:49:12Z

Scottsta:

There is a new look available in Infinite Campus. The old look is still available to use, but beginning Summer 2023 the old look will go away and you will have to use the new look. It is recommended that you use this year to get used to the new look.

To turn on the new look Click on the person icon in the top right corner and toggle it on.

[[File:InstructionNewLookToggle.png]]
[[File:ToolsNewLookToggle.png]]

Your screen will automatically refresh and put you into the new view. You will still have access to all the same tools you had before, but where you find them may have changed. You'll want to spend this year getting used to the new locations of the tools.

Here are some items that will be helpful...

==Campus Instruction==
For the teachers, when you turn on the new look, you no longer need to switch to Campus Instruction. Under the Main Menu (folder icon in top left) you will find Instruction. All of your tools that were in Campus Instruction will now be located here.

[[File:NewLookInstruction.png]]

==Breadcrumbs==
The new look introduces Breadcrumbs in the top right corner. You can click on these to view tools available at each level. For example, if I'm on Student Information > General > Summary, I can click on General to see all the tools in Student Information > General or I can click on Student information to see all the tools in Student Information.

[[File:NewLookBreadcrumbs.png]]

==Tab Location==
In the classic look the tabs were across the top of the screen. You will now find the tabs along the right side of the screen. The tabs are in alphabetical order. You will find some of the tab names have changed.

[[File:NewLookTabLocation.png]]

==Tool Search==
You can now search for tools. Go to the Search screen (magnifying glass icon in top left) and change the search drop-down to Tool. Search for a tool that you are looking for and it should show up in the results.

[[File:NewlookToolSearch.png]]

==Submitting Suggestions/Complaints==
You can submit suggestions and/or complaints to Infinite Campus to help them better Infinite Campus. To do this just look for the Feedback button. [[File:FeedbackButton.jpg]]

A small window will open either on the right side of the screen or as it's own window where you can enter your feedback for the screen you are on. At the top of the feedback window it will tell you what screen you are sending feedback for. Once you submit this information is sent to the Infinite Campus team assigned to working on that screen/tool. Please don't just send messages saying something is bad. If you don't like something provide a reason why it is bad so they know what isn't working and can work on it.

[[File:FeedbackWindow2.jpg]] [[File:FeedbackWindow1.jpg]]

==Favorites==
You can now flag the tools you use the most as a favorite. This will add the tools to your Favorites list so you no longer have to go through the Main Menu to find them.

To flag a tool as a Favorite just pull up the tool then click the star next to its name. You can also remove a tool from your Favorites by clicking the star again.

[[File:IC-NewLook-Select.jpg]]

Once you’ve flagged a tool as a Favorite you’ll find it in the Favorites list which is the menu tab with the star icon.

[[File:IC-NewLook-List.jpg]]

You can also change the order of your Favorites by clicking the Edit button then clicking and dragging the tools in the order you want them to be in. Click Save when you’re finished.

[[File:IC-NewLook-Change.jpg]]

File:IC-NewLook-Change.jpg

2023-02-07T22:46:10Z

Scottsta:

File:IC-NewLook-List.jpg

2023-02-07T22:45:51Z

Scottsta:

File:IC-NewLook-Select.jpg

2023-02-07T22:45:12Z

Scottsta:

New Look Coming to Campus

2023-02-07T22:44:20Z

Scottsta:

There is a new look available in Infinite Campus. The old look is still available to use, but beginning Summer 2023 the old look will go away and you will have to use the new look. It is recommended that you use this year to get used to the new look.

To turn on the new look Click on the person icon in the top right corner and toggle it on.

[[File:InstructionNewLookToggle.png]]
[[File:ToolsNewLookToggle.png]]

Your screen will automatically refresh and put you into the new view. You will still have access to all the same tools you had before, but where you find them may have changed. You'll want to spend this year getting used to the new locations of the tools.

Here are some items that will be helpful...

==Campus Instruction==
For the teachers, when you turn on the new look, you no longer need to switch to Campus Instruction. Under the Main Menu (folder icon in top left) you will find Instruction. All of your tools that were in Campus Instruction will now be located here.

[[File:NewLookInstruction.png]]

==Breadcrumbs==
The new look introduces Breadcrumbs in the top right corner. You can click on these to view tools available at each level. For example, if I'm on Student Information > General > Summary, I can click on General to see all the tools in Student Information > General or I can click on Student information to see all the tools in Student Information.

[[File:NewLookBreadcrumbs.png]]

==Tab Location==
In the classic look the tabs were across the top of the screen. You will now find the tabs along the right side of the screen. The tabs are in alphabetical order. You will find some of the tab names have changed.

[[File:NewLookTabLocation.png]]

==Tool Search==
You can now search for tools. Go to the Search screen (magnifying glass icon in top left) and change the search drop-down to Tool. Search for a tool that you are looking for and it should show up in the results.

[[File:NewlookToolSearch.png]]

==Submitting Suggestions/Complaints==
You can submit suggestions and/or complaints to Infinite Campus to help them better Infinite Campus. To do this just look for the Feedback button. [[File:FeedbackButton.jpg]]

A small window will open either on the right side of the screen or as it's own window where you can enter your feedback for the screen you are on. At the top of the feedback window it will tell you what screen you are sending feedback for. Once you submit this information is sent to the Infinite Campus team assigned to working on that screen/tool. Please don't just send messages saying something is bad. If you don't like something provide a reason why it is bad so they know what isn't working and can work on it.

[[File:FeedbackWindow2.jpg]] [[File:FeedbackWindow1.jpg]]

==Favorites==
You can now flag the tools you use the most as a favorite. This will add the tools to your Favorites list so you no longer have to go through the Main Menu to find them.

To flag a tool as a favorite just pull up the tool then click the star next to its name.

Once you’ve flagged a tool as a favorite you’ll find it in the Favorites list which is the menu tab with the star icon.

You can also change the order of your favorites by clicking the Edit button then clicking and dragging the tools in the order you want them to be in. Click Save when you’re finished.

New Look Coming to Campus

2022-10-19T16:55:45Z

Scottsta: /* Submitting Suggestions/Complaints */

There is a new look available in Infinite Campus. The old look is still available to use, but beginning Summer 2023 the old look will go away and you will have to use the new look. It is recommended that you use this year to get used to the new look.

To turn on the new look Click on the person icon in the top right corner and toggle it on.

[[File:InstructionNewLookToggle.png]]
[[File:ToolsNewLookToggle.png]]

Your screen will automatically refresh and put you into the new view. You will still have access to all the same tools you had before, but where you find them may have changed. You'll want to spend this year getting used to the new locations of the tools.

Here are some items that will be helpful...

==Campus Instruction==
For the teachers, when you turn on the new look, you no longer need to switch to Campus Instruction. Under the Main Menu (folder icon in top left) you will find Instruction. All of your tools that were in Campus Instruction will now be located here.

[[File:NewLookInstruction.png]]

==Breadcrumbs==
The new look introduces Breadcrumbs in the top right corner. You can click on these to view tools available at each level. For example, if I'm on Student Information > General > Summary, I can click on General to see all the tools in Student Information > General or I can click on Student information to see all the tools in Student Information.

[[File:NewLookBreadcrumbs.png]]

==Tab Location==
In the classic look the tabs were across the top of the screen. You will now find the tabs along the right side of the screen. The tabs are in alphabetical order. You will find some of the tab names have changed.

[[File:NewLookTabLocation.png]]

==Tool Search==
You can now search for tools. Go to the Search screen (magnifying glass icon in top left) and change the search drop-down to Tool. Search for a tool that you are looking for and it should show up in the results.

[[File:NewlookToolSearch.png]]

==Submitting Suggestions/Complaints==
You can submit suggestions and/or complaints to Infinite Campus to help them better Infinite Campus. To do this just look for the Feedback button. [[File:FeedbackButton.jpg]]

A small window will open either on the right side of the screen or as it's own window where you can enter your feedback for the screen you are on. At the top of the feedback window it will tell you what screen you are sending feedback for. Once you submit this information is sent to the Infinite Campus team assigned to working on that screen/tool. Please don't just send messages saying something is bad. If you don't like something provide a reason why it is bad so they know what isn't working and can work on it.

[[File:FeedbackWindow2.jpg]] [[File:FeedbackWindow1.jpg]]

File:FeedbackWindow2.jpg

2022-10-19T16:53:39Z

Scottsta:

File:FeedbackWindow1.jpg

2022-10-19T16:53:28Z

Scottsta:

New Look Coming to Campus

2022-10-19T16:53:15Z

Scottsta:

There is a new look available in Infinite Campus. The old look is still available to use, but beginning Summer 2023 the old look will go away and you will have to use the new look. It is recommended that you use this year to get used to the new look.

To turn on the new look Click on the person icon in the top right corner and toggle it on.

[[File:InstructionNewLookToggle.png]]
[[File:ToolsNewLookToggle.png]]

Your screen will automatically refresh and put you into the new view. You will still have access to all the same tools you had before, but where you find them may have changed. You'll want to spend this year getting used to the new locations of the tools.

Here are some items that will be helpful...

==Campus Instruction==
For the teachers, when you turn on the new look, you no longer need to switch to Campus Instruction. Under the Main Menu (folder icon in top left) you will find Instruction. All of your tools that were in Campus Instruction will now be located here.

[[File:NewLookInstruction.png]]

==Breadcrumbs==
The new look introduces Breadcrumbs in the top right corner. You can click on these to view tools available at each level. For example, if I'm on Student Information > General > Summary, I can click on General to see all the tools in Student Information > General or I can click on Student information to see all the tools in Student Information.

[[File:NewLookBreadcrumbs.png]]

==Tab Location==
In the classic look the tabs were across the top of the screen. You will now find the tabs along the right side of the screen. The tabs are in alphabetical order. You will find some of the tab names have changed.

[[File:NewLookTabLocation.png]]

==Tool Search==
You can now search for tools. Go to the Search screen (magnifying glass icon in top left) and change the search drop-down to Tool. Search for a tool that you are looking for and it should show up in the results.

[[File:NewlookToolSearch.png]]

==Submitting Suggestions/Complaints==
You can submit suggestions and/or complaints to Infinite Campus to help them better Infinite Campus. To do this just look for the Feedback button. [[File:FeedbackButton.jpg]]

A small window will open where you can enter your feedback for the screen you are on. At the top of the feedback window it will tell you what screen you are sending feedback for. Once you submit this information is sent to the Infinite Campus team assigned to working on that screen/tool. Please don't just send messages saying something is bad. If you don't like something provide a reason why it is bad so they know what isn't working and can work on it.

File:FeedbackButton.jpg

2022-10-19T16:52:23Z

Scottsta: